Mounted, level, and tidy - same week.
Starting at $179 for TVs up to 65 inches, including stud-mount, level, and cable tidy-up. Bigger screens or tricky walls? Send a photo with your request and we'll quote the difference up front.
What's included
The same scope on every booking. No upcharges mid-job for things that were always part of doing it right.
- Stud detection and confirmation before we drill
- Mount installation on drywall, lath, or concrete (with appropriate anchors)
- TV mounted, level checked twice, tightened to torque spec
- Power and HDMI cable tucked behind a low-profile raceway or in-wall (where code allows)
- Tidy-up - drywall dust vacuumed, your space left cleaner than we found it
- Bracket included for TVs up to 65 inches if you don't have one
Real Kelowna pricing
Starting prices for common variants of this job. Your specific job gets a firm written quote before you book, and the quote is the invoice.
| Job | Price |
|---|---|
| TV mount up to 65" (flat or tilt bracket) | $179 |
| TV mount 66"-85" (heavy-duty bracket) | $229 |
| Full-motion / articulating bracket upgrade | +$50 |
| In-wall power + HDMI relocation | +$120 |
| Concrete or brick wall mounting | +$60 |
| Multi-TV install (2+ on same booking) | 10% off each |
Prices include labour. Materials at cost. GST extra. Don't see your variant? Send us the details and we'll quote it.
Every TV mount we do gets the same treatment: we find the studs first (and confirm with a second pass), level the bracket on a laser line, and torque the lag bolts to spec. Then we mount the TV, level again, and check that the lockdown pin is engaged. The whole job takes about an hour for a standard living room install.
Three things we don't do: rush, skip the level check, or leave drywall dust behind. The job isn't done until your space looks like we were never there.
Common questions
Do I need to provide the bracket?+
No. Our $179 starting price includes a tilt or fixed bracket for TVs up to 65 inches. If you've already bought one (or want a specific full-motion arm), we'll use yours and the base price doesn't change.
Can you hide the cables in the wall?+
Usually yes, when the wall cavity is accessible and there's no obstruction. We add $120 to run an in-wall power kit (CSA-approved, code-compliant) and route HDMI through the same hole. If the wall is solid concrete or has fire-blocking we hit, we'll switch to a surface raceway and let you know the change before drilling.
What if the wall doesn't have studs where I want the TV?+
Plan A is to find studs within 12 inches of your preferred spot and shift slightly. Plan B is heavy-duty toggle anchors rated for the TV weight (we use SnapToggle 3/8" or equivalent). We won't mount a heavy TV on drywall alone - that's how brackets fail at 2 AM.
Do you mount on brick fireplaces?+
Yes. Brick or stone above a fireplace adds $60 for the masonry drill + anchors and an extra heat-check step (we measure with an IR gun during operation to make sure your TV isn't sitting in a heat plume). If the surface is over 40°C during a fire, we'll recommend a different spot.
How quickly can you come?+
Most weekday bookings get a same-week slot. Same-day TV mounting is sometimes possible if you call before noon. Saturday mornings 8-2 are standard hours. You'll get a text confirmation 30 minutes before arrival.
Kelowna proper. Not spread thin.
We cover Kelowna, West Kelowna, Lake Country, and the Central Okanagan. No travel surcharges inside our zone, ever.
Ready to book?
Tell us about the job and get a firm written quote, often the same day. Book your slot once you approve the price.